Aqua-Hot 375-LP Installation Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
© 2011 Aqua-Hot
®
375-LP Installation Manual
SECTION 7: PROPANE CONNECTION
Ensure that all tubing and fittings obey all local,
state, and national codes regarding size and type.
Ensure that the materials used for the propane sup-
ply line obey both the current ANSI 119.2 (NFPA
1192) and CSA Z240 Standards on Recreational Ve-
hicles.
1. Check the Recreational Vehicle’s propane mani-
fold for an available 3/8 inch port for the pro-
pane supply line to the Aqua-Hot’s propane inlet
port.
If an available port does not exist, install a
“tee” fitting into the manifold to provide a
3/8 inch port.
2. Run a 3/8 inch line of an approved material
from the propane manifold to the manual shut-
off valve installed on the Aqua-Hot’s propane
inlet port.
3. Tighten both connections thoroughly using two
wrenches to ensure that no leaks can occur.
Figure 38
— Page 32 —
Propane Manifold (Example)
WARNING!
Use caution when working on or near the pro-
pane gas system.
- Do not smoke or use an open flame near the
propane gas system.
- Do not use an open flame to examine for
leaks.
- To avoid possible propane gas leaks, always
use two wrenches to tighten or loosen the gas
supply line connectors.
- Leaking propane can ignite or explode and
result in dangerous personal injury or death.
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Comments to this Manuals

No comments